I got a used Thermalright SI-120 for the P180, and was very impressed with the reduced load temps. 10 degrees lower running 2xCPUBurn, maximum load temp 51c at 12 volts with the fan pulling air up.
I then reversed the airflow and load temp dropped even lower, at 49c. With the fan running at 7 volts load temp was 55c. An accident happened while cutting the fan corners in order to fit the standard retention wires of the HSF, and the frame broke! I had to improvise, I used double sided tape for the hub and tied the fan brackets with some wire.
Nice!
No comments:
Post a Comment